BYOP InvisiBoob Vamp Pasties
Bedazzle Your Own Pasties!
Clear Vinyl InvisiBoob Illusion Pasties
Available with or without swivel
Instructions:
Clean with Rubbing Alcohol and lint free cloth to remove any oils or gunk from handling.
Let air dry
Recommended Glue E6000 Fabri Fuse
Apply Glue to pastie base,
let sit for 30 seconds then apply rhinestones
This helps to keep your stones from sliding
If you are using larger stones/shapes I suggest adding the glue to the back of the stone first and letting it sit a minute before adding to the pastie base.
The heavier the stone the more it will want to slide off your pastie.
For ease of handling and not bumping your stones out of place. I recommend bedazzling around the swivel or middle and the outer edges first then let dry and set for 30 minutes or until the stones no longer slide around.
Check on your stones during this process.
Now that your first round of stones are set you can bedazzle until your heart’s content.
Bedazzle Your Own Pasties!
Clear Vinyl InvisiBoob Illusion Pasties
Available with or without swivel
Instructions:
Clean with Rubbing Alcohol and lint free cloth to remove any oils or gunk from handling.
Let air dry
Recommended Glue E6000 Fabri Fuse
Apply Glue to pastie base,
let sit for 30 seconds then apply rhinestones
This helps to keep your stones from sliding
If you are using larger stones/shapes I suggest adding the glue to the back of the stone first and letting it sit a minute before adding to the pastie base.
The heavier the stone the more it will want to slide off your pastie.
For ease of handling and not bumping your stones out of place. I recommend bedazzling around the swivel or middle and the outer edges first then let dry and set for 30 minutes or until the stones no longer slide around.
Check on your stones during this process.
Now that your first round of stones are set you can bedazzle until your heart’s content.
Bedazzle Your Own Pasties!
Clear Vinyl InvisiBoob Illusion Pasties
Available with or without swivel
Instructions:
Clean with Rubbing Alcohol and lint free cloth to remove any oils or gunk from handling.
Let air dry
Recommended Glue E6000 Fabri Fuse
Apply Glue to pastie base,
let sit for 30 seconds then apply rhinestones
This helps to keep your stones from sliding
If you are using larger stones/shapes I suggest adding the glue to the back of the stone first and letting it sit a minute before adding to the pastie base.
The heavier the stone the more it will want to slide off your pastie.
For ease of handling and not bumping your stones out of place. I recommend bedazzling around the swivel or middle and the outer edges first then let dry and set for 30 minutes or until the stones no longer slide around.
Check on your stones during this process.
Now that your first round of stones are set you can bedazzle until your heart’s content.
